Archives July 2023

Jul, Sat, 2023
How to avoid lamination peel offs from digital pritns

Here are some tips on how to avoid lamination peel offs from digital prints:

  • Use a high-quality laminating film that is specifically designed for digital prints. These films have a stronger adhesive that will adhere better to the ink on the print.
  • Let the digital print dry completely before laminating. The ink needs time to cure so that it will not be affected by the heat of the laminator.
  • Use a heat laminator and set it to the highest temperature that the film can withstand. The heat will help to melt the adhesive on the film and create a more secure bond.
  • Apply the film evenly and slowly. Don’t let any air bubbles get trapped under the film, as these can cause the lamination to peel off later.
  • Press down firmly on the lamination film after it has been applied. This will help to force out any air bubbles and create a more secure bond.
  • Let the laminated print cool completely before handling it. The heat from the laminator can cause the film to be temporarily soft and more likely to peel off.

Here are some additional tips:

  • If you are laminating a small item, you can try using a hair dryer to heat the film. Just be careful not to overheat the film, as this can cause it to warp or bubble.
  • If you are laminating a large item, you may want to consider using a professional laminating service. They will have the experience and equipment to ensure that your project comes out looking its best.

By following these tips, you can help to prevent lamination peel offs from digital prints and create a finished product that will last for years to come.

Jasmeet Jasmeet
Binding , Lamination , Troubshooting
How to avoid lamination peel offs from digital pritns

Here are some tips on how to avoid lamination peel offs from digital prints:

  • Use a high-quality laminating film that is specifically designed for digital prints. These films have a stronger adhesive that will adhere better to the ink on the print.
  • Let the digital print dry completely before laminating. The ink needs time to cure so that it will not be affected by the heat of the laminator.
  • Use a heat laminator and set it to the highest temperature that the film can withstand. The heat will help to melt the adhesive on the film and create a more secure bond.
  • Apply the film evenly and slowly. Don’t let any air bubbles get trapped under the film, as these can cause the lamination to peel off later.
  • Press down firmly on the lamination film after it has been applied. This will help to force out any air bubbles and create a more secure bond.
  • Let the laminated print cool completely before handling it. The heat from the laminator can cause the film to be temporarily soft and more likely to peel off.

Here are some additional tips:

  • If you are laminating a small item, you can try using a hair dryer to heat the film. Just be careful not to overheat the film, as this can cause it to warp or bubble.
  • If you are laminating a large item, you may want to consider using a professional laminating service. They will have the experience and equipment to ensure that your project comes out looking its best.

By following these tips, you can help to prevent lamination peel offs from digital prints and create a finished product that will last for years to come.

Jul, Sat, 2023
How to avoid spots in lamination

How to avoid spots in lamination over dark colors:

  • Use a high-quality laminating film. Cheaper films may not be as opaque and may allow the dark color of the substrate to show through, creating spots.
  • Make sure the surface of the substrate is clean and dry. Any dirt or moisture can cause the film to not adhere properly, resulting in spots.
  • Apply the film evenly. Don’t let any air bubbles get trapped under the film, as these can also cause spots.
  • Use a heat laminator if possible. Heat helps to melt the adhesive on the film, creating a more secure bond.
  • If you’re using a cold laminator, make sure to apply enough pressure. The pressure helps to force out any air bubbles and create a more uniform finish.

Here are some additional tips:

  • If you’re laminating a small item, you can try using a hair dryer to heat the film. Just be careful not to overheat the film, as this can cause it to warp or bubble.
  • If you’re laminating a large item, you may want to consider using a professional laminating service. They will have the experience and equipment to ensure that your project comes out looking its best.

With a little care and attention, you can avoid spots in lamination over dark colors and create a finished product that looks professional and polished.

 
Jasmeet Jasmeet
Lamination , Post Press , Troubshooting
How to avoid spots in lamination

How to avoid spots in lamination over dark colors:

  • Use a high-quality laminating film. Cheaper films may not be as opaque and may allow the dark color of the substrate to show through, creating spots.
  • Make sure the surface of the substrate is clean and dry. Any dirt or moisture can cause the film to not adhere properly, resulting in spots.
  • Apply the film evenly. Don’t let any air bubbles get trapped under the film, as these can also cause spots.
  • Use a heat laminator if possible. Heat helps to melt the adhesive on the film, creating a more secure bond.
  • If you’re using a cold laminator, make sure to apply enough pressure. The pressure helps to force out any air bubbles and create a more uniform finish.

Here are some additional tips:

  • If you’re laminating a small item, you can try using a hair dryer to heat the film. Just be careful not to overheat the film, as this can cause it to warp or bubble.
  • If you’re laminating a large item, you may want to consider using a professional laminating service. They will have the experience and equipment to ensure that your project comes out looking its best.

With a little care and attention, you can avoid spots in lamination over dark colors and create a finished product that looks professional and polished.

 
Jul, Thu, 2023
Security Features

Holographic hot foil stamping is a process that uses heat and pressure to apply a holographic foil to a substrate. The holographic foil is made up of several layers of film that are bonded together. When the foil is heated, the layers separate and the holographic image is revealed. The pressure then forces the foil to adhere to the substrate.

Holographic hot foil stamping is a popular way to add security and decoration to products. It is often used on credit cards, identification cards, and other high-security documents. It is also used on packaging, labels, and other promotional materials.

The benefits of holographic hot foil stamping include:

  • Security: Holographic images are difficult to counterfeit, making them a good choice for security applications.
  • Decoration: Holographic images can add a touch of luxury and sophistication to products.
  • Durability: Holographic foil is durable and resistant to fading and scratching.

The drawbacks of holographic hot foil stamping include:

  • Cost: Holographic hot foil stamping can be more expensive than other printing methods.
  • Complexity: Holographic hot foil stamping is a complex process that requires specialized equipment.
  • Registration: It is important to ensure that the holographic image is registered correctly, otherwise the image will be distorted.

Overall, holographic hot foil stamping is a versatile and effective way to add security and decoration to products. It is a good choice for applications where security and durability are important.

Here are some examples of products that use holographic hot foil stamping:

  • Credit cards
  • Identification cards
  • Packaging
  • Labels
  • Promotional materials
  • Cosmetics
  • Jewelry
  • Giftware

If you are looking for a way to add security and decoration to your products, holographic hot foil stamping is a good option to consider.

Jasmeet Jasmeet
Print Knowledge
Security Features

Holographic hot foil stamping is a process that uses heat and pressure to apply a holographic foil to a substrate. The holographic foil is made up of several layers of film that are bonded together. When the foil is heated, the layers separate and the holographic image is revealed. The pressure then forces the foil to adhere to the substrate.

Holographic hot foil stamping is a popular way to add security and decoration to products. It is often used on credit cards, identification cards, and other high-security documents. It is also used on packaging, labels, and other promotional materials.

The benefits of holographic hot foil stamping include:

  • Security: Holographic images are difficult to counterfeit, making them a good choice for security applications.
  • Decoration: Holographic images can add a touch of luxury and sophistication to products.
  • Durability: Holographic foil is durable and resistant to fading and scratching.

The drawbacks of holographic hot foil stamping include:

  • Cost: Holographic hot foil stamping can be more expensive than other printing methods.
  • Complexity: Holographic hot foil stamping is a complex process that requires specialized equipment.
  • Registration: It is important to ensure that the holographic image is registered correctly, otherwise the image will be distorted.

Overall, holographic hot foil stamping is a versatile and effective way to add security and decoration to products. It is a good choice for applications where security and durability are important.

Here are some examples of products that use holographic hot foil stamping:

  • Credit cards
  • Identification cards
  • Packaging
  • Labels
  • Promotional materials
  • Cosmetics
  • Jewelry
  • Giftware

If you are looking for a way to add security and decoration to your products, holographic hot foil stamping is a good option to consider.